Search Results

Japan Approves Adjusted Tsunami Height Assessment for Genkai Nuclear Power Plant

At its regular meeting held on September 2, Japan's Nuclear Regulation Authority (NRA) formally approved Kyushu Electric Power Co.'s assessment of the maximum potential tsunami height at the Genkai Nuclear Power Plant site in Saga Prefecture. Under this adjustment, the maximum tsunami height on the northwest side of the Genkai plant site has been raised to 14 meters; previously, the maximum tsunami height on the north side of the site was 6 meters. The NRA determined that the ground surface on the northwest side of the Genkai plant site is covered by bedrock with an elevation of 16 meters, and therefore no additional disaster prevention measures are required even under the new tsunami height assessment. In July, the NRA had already approved the review report draft submitted by Kyushu Electric Power...

2026-09-02

Hiconics Signs Contract for Main Helium Circulator Variable Frequency Drive Project at Xuwei Nuclear Heating and Power Generation Plant

Recently, Hiconics signed a contract for the main helium circulator variable frequency drive (VFD) project for the high-temperature gas-cooled reactor (HTGR) at the Jiangsu Xuwei Nuclear Heating and Power Plant, and will supply multiple sets of HC2000W four-quadrant water-cooled high-voltage VFDs for the project. This marks the second application of Hiconics' VFD technology in drive scenarios for key equipment related to Generation IV nuclear power, following the HTGR demonstration project at Huaneng Shandong Shidao Bay Nuclear Power Plant. The Jiangsu Xuwei Nuclear Heating and Power Generation Project is a comprehensive nuclear energy utilization project that adopts a coordinated operation model of "nuclear reactor – turbine generator unit – heating system," focusing primarily on industrial heating while also supplying electricity. Phase I of the project plans to construct two Hualong One pressurized water reactors and one HTR-PM600S high-temperature gas-cooled reactor...

2026-09-02

Russia's Smolensk NPP begins loading improved nuclear fuel

On September 1, 2026, local time, Unit 1 of Russia's Smolensk Nuclear Power Plant began gradually loading improved nuclear fuel. The fuel assemblies feature adjusted uranium-235 enrichment and erbium oxide content, as part of the RBMK-1000 reactor modernization program aimed at enhancing unit operational safety and efficiency. The Smolensk NPP is part of the electric power division of Rosatom and is operated by Rosenergoatom. The fuel assemblies loaded into the core this time use lower uranium-235 enrichment and lower erbium oxide content. According to relevant calculations, the new fuel can compensate for changes in core neutronics parameters following graphite stack repair...

2026-09-02

U.S. Plans to Build Second Uranium Conversion Plant

Raven-Flint Nuclear Corporation announced on August 31 that it has been selected for the Nuclear Energy Startup Platform project advanced by the U.S. Department of Energy (DOE) National Reactor Innovation Center (NRIC) at Idaho National Laboratory (INL), and plans to build a pilot uranium conversion facility named "Torch" at INL. The company stated that the Torch facility aims to become the second uranium conversion plant in the United States, with a designed annual processing capacity of 500 metric tons of uranium, capable of converting uranium into uranium hexafluoride (UF6). According to the company, this scale can meet the fuel demand of two large nuclear reactors. Upon project completion, it is intended to serve the U.S. Department of Energy and its affiliated agencies, and may provide domestically produced uranium hexafluoride for specific needs.

2026-09-02

Busan, South Korea Secures 2027 Budget Support; Export-Oriented Research Reactor and Other Projects Included in Government Proposal

Busan Metropolitan City recently announced that multiple national projects aligned with its core development goals have been included in the South Korean government's 2027 budget proposal, including the Gadeok Island New Airport, a new export-oriented research reactor, a heavy ion accelerator, as well as industrial projects such as port artificial intelligence, naval vessel maintenance, repair and overhaul, and power semiconductors. Under the budget arrangement, the Gadeok Island New Airport construction project has secured 431.1 billion KRW in support. To enhance maritime and logistics competitiveness, the budget proposal also includes 7.35 billion KRW for a demonstration project on autonomous port cargo handling equipment, 36.4 billion KRW to support shipbuilding and shipping cooperation, 5 billion KRW to strengthen the global competitiveness of small and medium-sized shipbuilders in naval vessel maintenance, repair and overhaul, and an additional 24.9 billion KRW allocated for the development of a fishery products industrial cluster.

2026-09-02

Carbon Nanotubes Can "Remember" Their Initial Structure, Isotope Labeling Reveals Dynamic Growth Process

A study released on September 1 shows that carbon nanotubes can maintain their initial atomic structure in dynamically changing growth environments. The research team used digital isotope labeling technology to encode the elongation process of individual carbon nanotubes as sequences of different carbon isotope compositions, and read their growth history through Raman spectroscopy, thereby tracking the structural stability of nanotubes under conditions of temperature variation and catalyst evolution. The properties of carbon nanotubes are highly dependent on their atomic arrangement. The same material may exhibit metallic or semiconducting characteristics due to structural differences, so structural uniformity has always been a key issue for the large-scale application of carbon nanotubes. In floating catalyst chemical vapor deposition and other industrial production routes, catalyst particles experience constantly changing temperatures and gas compositions within the reactor and may undergo irreversible enlargement. Previously, direct evidence was lacking on whether individual carbon nanotubes could maintain their initial structure under such complex conditions.

2026-09-02

Japanese Team Develops High-Temperature, High-Pressure Isotope Ratio Analysis Method for Tracing Halogenated Pollutants

Researchers from Shibaura Institute of Technology (SIT) and the National Institute of Advanced Industrial Science and Technology (AIST) in Japan have collaboratively developed a customized high-temperature, high-pressure combustion interface for liquid chromatography-isotope ratio mass spectrometry (LC-IRMS), enabling carbon stable isotope ratio (δ¹³C) analysis of various halogenated organic compounds. The research findings were published online on August 2, 2026, and will appear in Volume 1421 of Analytica Chimica Acta, scheduled for release on November 1, 2026. Source of the new high-temperature, high-pressure LC-IRMS system: Professor Hiroto Kawashima, SIT, Japan. Halogenated organic compounds are widely present in disinfection byproducts, pesticides, refrigerants, and industrial chemicals, some of which exhibit persistence, bioaccumulation, and toxicity. Traditional environmental monitoring primarily relies on concentration measurements, which makes it difficult to directly provide information on pollutant sources and environmental transformation processes. δ¹³C analysis can offer clues for studying chemical sources, production processes, and environmental fate, but organic pollutants containing strong carbon—chlorine or carbon—fluorine bonds are difficult to fully oxidize under conventional LC-IRMS combustion conditions, limiting the application of this technique.

2026-09-02

South Korea's Uljin Pushes Forward with Nuclear Hydrogen Industrial Complex Development

Uljin County in North Gyeongsang Province, South Korea, is seeking support from the National Assembly and the government to promote the construction of the Uljin Nuclear Hydrogen National Industrial Complex, with the goal of establishing the region as a clean hydrogen production hub through supporting policies such as stable power supply and hydrogen pipeline networks. On August 31, Uljin County Governor Hwang Ui-jo attended a nuclear hydrogen policy seminar held at the National Assembly Members' Office Building to present the progress of the Uljin Nuclear Hydrogen National Industrial Complex and the policy tasks required for developing the nuclear hydrogen industry. The seminar was hosted by the National Assembly Hydrogen Economy Forum, with participants from the National Assembly, government, local governments, industry, academia, and...

2026-09-02

US Antares to Apply Racing Power Electronics to Microreactors

Antares, a US nuclear fission energy company, recently announced a partnership with UK technology supplier Motion Applied to deploy the latter's race-proven power electronics in its microreactor power conversion system. According to Antares, Motion Applied has long served motorsport and other demanding applications, accumulating expertise in high-performance electronics and electrification technologies. This collaboration will enable Antares to use more mature, production-grade hardware in its microreactor program, reducing the time and cost associated with developing dedicated power conversion equipment from scratch. Antares Chief Nuclear Officer Ri...

2026-09-02

US OSC Global and InfraShield Launch Advanced Reactor Cybersecurity Program

OSC Global and InfraShield recently announced the joint launch of the Janus Cyber program to provide cybersecurity support for developers planning to deploy advanced reactors at US military installations. The program will deliver integrated services covering nuclear regulation, US Department of War (DoW) authorization, and operational technology/industrial control system (OT/ICS) cybersecurity requirements. The two companies stated that advanced reactors operating in US military environments must simultaneously meet multiple requirements, including nuclear-sector cybersecurity regulation, military authorization, and industrial control system protection. Janus Cyber will coordinate...

2026-09-02

Amentum Selected for UK Grid Upgrade and Protection Projects

Amentum has announced that it has been selected by SSEN Transmission to undertake strategic roles under two UK energy framework agreements, providing digital and cybersecurity engineering services for UK grid upgrades. Under the arrangements, Amentum will serve as the sole supplier of high-end cybersecurity engineering services, contributing to the digitalization and security capability enhancement of the UK power grid. The services will focus on critical asset protection, digital capability expansion, operational data application, and security architecture development for grid operations. SSEN Transmission is the owner of the high-voltage transmission system in northern Scotland...

2026-09-02

NuScale Completes First Manufacturing of Boron Carbide Pellets for SMR Safety Component in the U.S.

NuScale Power and MillenniTEK recently announced that they have successfully manufactured the first batch of boron carbide pellets for NuScale's passive emergency core cooling system (ECCS). This component will be used in NuScale's small modular reactor (SMR) technology and is one of the dedicated components in its reactor safety system. According to reports, in nuclear power plants employing NuScale technology, when the emergency core cooling system is activated, the boron carbide pellets dissolve into the reactor coolant, helping to control and maintain core reactivity at safe levels without operator intervention. This manufacturing effort is considered a key advancement in NuScale's preparation for commercial deployment, involving the validation of dedicated safety components and associated manufacturing processes.

2026-09-02

Lightbridge Multi-Zone Fuel Element Granted Japanese Patent, Covering Fuel Assemblies and 3D Printing Manufacturing Methods

Advanced nuclear fuel technology company Lightbridge Corporation recently announced that its Japanese patent application for a multi-zone fuel element has been granted by the Japan Patent Office. The patent covers the fuel element design, fuel assemblies incorporating the design, and methods of producing the element via additive manufacturing, i.e., 3D printing. According to the disclosure, the patent involves a fuel rod composed of three layers of different materials. The thickness of the three layers can vary along the length of the fuel rod, thereby regulating fuel performance at different positions in the reactor to enhance reactor operating performance and safety margins. In addition to the fuel rod itself, the patent also covers fuel assemblies for mounting these fuel rods.

2026-09-02

Canada's Devonian Integrates HPLC-MS, NMR, and Cell-Based Potency Assays into Thykamine Quality Control Platform

Devonian Health Group Inc., a Canadian clinical-stage biopharmaceutical company, recently announced that it has completed independent validation of key analytical methods and biological quality control technologies and integrated them into the extraction and production process of Thykamine, the company's lead active pharmaceutical botanical candidate. According to the company, its quality control program includes validated high-performance liquid chromatography-mass spectrometry (HPLC-MS) chemical fingerprinting, nuclear magnetic resonance (NMR) spectroscopy, and cell-based biological potency assays based on the U937 human cell line. The relevant cell-based assays use macrophage inflammatory protein-1β (MIP-1β) as a biomarker of Thykamine's anti-inflammatory activity...

2026-09-02

Global Advanced Nuclear Energy Market Report Focuses on SMR and Fusion Development

The recently released "Global Advanced Nuclear Energy Market Report 2027–2047" shows that the global advanced nuclear energy industry is transitioning from concept validation and early-stage R&D to a new phase where project deployment, capital inflow, and supply chain development proceed in parallel. The report uses 2027 as the base year with a two-year baseline period to assess the development trajectory of the advanced nuclear energy market over the next 20 years. It covers small modular reactors (SMRs), nuclear fusion, and a range of emerging advanced nuclear technologies, including molten salt reactors, high-temperature gas-cooled reactors, lead-cooled fast reactors, sodium-cooled fast reactors, microreactors, advanced fuel cycles, integrated nuclear energy systems, and the application of artificial intelligence in nuclear power plant operations...

2026-09-02