Search Results

India is advancing its nuclear power project in Rajasthan

The nuclear power company NPCIL is seeking environmental clearance to build two new nuclear reactors in Rajasthan, which will be connected to the existing Rajasthan Nuclear Power Plant. The project is part of India's ambitious nuclear power expansion plan, which aims to increase nuclear energy capacity from the current approximately 7,490 MW to 22,490 MW by 2035. The Indian government has consistently regarded nuclear energy as key to meeting growing energy demand and achieving climate goals. The Rajasthan Nuclear Power Plant currently operates 8 nuclear reactors with a total capacity of 6,400 MW. The new reactors will further increase the region's nuclear power capacity. NPCIL stated that these new reactors will...

2026-09-29

The main control room large screen of Unit 1 of SPIC Lianjiang Nuclear Power Project was successfully lit up

On September 28, the main control room large screen of Unit 1 of SPIC Lianjiang Nuclear Power Project was successfully lit up, marking that the unit construction has entered a new stage and laying a solid foundation for the subsequent cold test, hot test, and high-quality commissioning. The main control room is the control center of a nuclear power plant, mainly including important equipment such as the unit operation operator workstations and related control panels. It is the "brain" of the nuclear power plant and undertakes the core functions of unit operation monitoring, organization, and command.

2026-09-29

Unit 2 of State Power Investment Corporation (SPIC) Guangxi Bailong Nuclear Power Project starts construction

At 18:27 on September 27, the nuclear island of Unit 2 of State Power Investment Corporation (SPIC) Guangxi Nuclear Power Bailong Nuclear Power Project began its first concrete pour (FCD), marking that Phase I of the Bailong Nuclear Power Project has shifted from single-unit construction to a new stage of comprehensive dual-unit construction. The FCD for Unit 2 of the Bailong Nuclear Power Project adopted a single-side pushing continuous one-time integral pouring method, with approximately 6,637 cubic meters of concrete planned to be poured over approximately 58 hours. In view of the multiple overlapping construction difficulties such as the large bottom slab size, irregular shape, and high difficulty of temperature control and curing, the project team prepared a special construction plan in advance and implemented all-round safeguard measures. The single-side pushing pouring path and process parameters were optimized, and the owner, supervisor and general contractor exercised full-process on-site supervision and control

2026-09-28

International Seminar of Veteran Nuclear Decommissioning Experts Held in Bishkek, Kyrgyzstan: Focusing on Central Asian Nuclear Energy Prospects and Cooperation on Kyrgyzstan's SMR Project

On September 24, 2026, with the joint support of Rosatom and the Council of Energy Veterans of the Kyrgyz Republic (Совет ветеранов энергетики Киргизской Республики), the International Seminar on the Prospects for the Development of Nuclear Energy and Nuclear Technologies in the Kyrgyz Republic, organized by the International Union of Veteran Experts in Nuclear Energy and Industry (МСВАЭП), was held in Bishkek, the capital of Kyrgyzstan. Senior experts in the nuclear and electric power industries from Kyrgyzstan, Russia, Kazakhstan, Tajikistan, Uzbekistan and other Central Asian countries...

2026-09-27

Ethiopia Plans to Join Forces with Russia to Accelerate the Construction of Its Nuclear Power Project

Alexey Likhachev, Director General of Rosatom State Atomic Energy Corporation (Госкорпорация «Росатом» / Rosatom), stated that Ethiopia (Эфиопия / Ethiopia) is actively seeking to accelerate the development of its nuclear power industry. Likhachev noted that the two sides had previously reached a preliminary cooperation agreement, but before formally launching the construction of the nuclear power plant project, multiple statutory and technical preparatory procedures in the early preparation stage still need to be completed. Ethiopian Prime Minister Abiy Ahmed Ali (Абий Ах...

2026-09-24

Bechtel Exits TerraPower's Sodium-Cooled Reactor Project

U.S. engineering, procurement, construction (EPC) and project management company Bechtel has decided to withdraw from TerraPower's Natrium nuclear reactor project. TerraPower stated that both parties have decided to develop independently and will re-tender the project's engineering, procurement and construction contract for building the first Natrium nuclear reactor in Kemmerer, Wyoming, USA.

2026-09-23

US Delivers Cold War-Era Reactor Molten Salt Coolant to Texas Nuclear Innovation Project

The U.S. nuclear energy sector has recently seen a landmark cross-generational collaboration. The U.S. Department of Energy (DOE)'s Oak Ridge National Laboratory (ORNL) has formally delivered over 2 metric tons of FLiBe molten salt to Natura Resources, a nuclear startup headquartered in Abilene, Texas. This batch of molten salt once served as the coolant for the historic Molten Salt Reactor Experiment (MSRE) during the Cold War, and after decades in storage, it has been reactivated to support the research, development, and deployment of fourth-generation nuclear reactor technology. The delivered FLiBe molten salt is a mixture of lithium fluoride and beryllium fluoride, and its distinctive feature is that the lithium-7 (Li-7) isotope abundance within it reaches as high as 99.99%...

2026-09-20

X-energy and Centrica Partner to Launch the UK's First Xe-100 Advanced Modular Nuclear Power Plant Project

The UK government has approved the regulatory assessment phase for advanced reactors, marking an important step forward for the construction of a new generation of nuclear power plants. X-energy and Centrica are collaborating to build a new generation of nuclear power plants in the UK using the Xe-100 advanced modular reactor, with the first project sited at Hartlepool. This collaboration is of great significance, marking substantial progress on the UK's nuclear energy development path and laying the foundation for broader nuclear power plant construction in the future. Alistair Black, Vice President and UK Market Lead at X-energy, emphasized that since signing the cooperation agreement with Centrica, both parties have been working together on the first project at Hartlepool...

2026-09-18

Deep Fission Discloses Safety Design Agreement for Kansas Nuclear Pilot Project

Deep Fission, the company building a nuclear reactor one mile underground in Parsons, Kansas, made its federally approved safety report public on Monday. The U.S. Department of Energy approved the company's safety design for its Gravity nuclear reactor in July of this year. A press release stated that the company publicly released the report, with only a very small number of details involving safety privacy redacted. Liz Muller, co-founder and CEO of Deep Fission, said in the press release that the company disclosed the complete Nuclear Safety Design Agreement because they believe the public has the right to see the true safety...

2026-09-18

Holtec SMR project receives regulatory approval to proceed with early site construction

The U.S. Nuclear Regulatory Commission (NRC) has granted Holtec International a regulatory exemption allowing the company to advance certain early construction activities for two small modular reactor (SMR) units at the Palisades Energy Center in Michigan before obtaining a Limited Work Authorization (LWA). Palisades SMR, a wholly owned subsidiary of Holtec International, submitted the first part of a phased construction permit application to the NRC last December for the dual-unit SMR-300 project (Units Pioneer 1 and 2). The application included a request for a Limited Work Authorization to allow construction activities to begin before a construction permit or combined...

2026-09-17

Canadian uranium exploration company Triton Uranium advances Atlas project, identifies 46.56 million pounds of potential uranium resources

Canadian uranium exploration company Triton Uranium recently announced that it has completed four technical reports compliant with NI 43-101 and S-K 1300 standards for its Atlas project located in Saskatchewan. The reports indicate that satellite mineralized occurrences and exploration target areas within the project area exhibit low-grade open-pit potential resources of up to 46.56 million pounds of triuranium octoxide (U₃O₈). This major technical breakthrough comes as the United States and Canada accelerate the construction of a continent-wide critical minerals supply chain under the U.S.-Canada Critical Minerals Action Plan. Meanwhile, Canada is fully advancing its nuclear energy strategy, with new reactor construction, small modular reactor (SMR) development, and the refurbishment of existing units...

2026-09-17

Blue Energy Submits Construction Permit Application to U.S. Nuclear Regulatory Commission to Advance Texas Gas-to-Nuclear Project

Blue Energy announced that it has submitted Part One of its construction permit application to the U.S. Nuclear Regulatory Commission (NRC) for its first gas-to-nuclear project at Port Victoria, Texas. This milestone move makes Blue Energy one of only five nuclear energy companies to have submitted a construction permit application to the NRC in the current new wave of nuclear power development. Blue Energy employs the Blue Way of prefabricated and standardized construction, transport, and assembly of nuclear power plants. Compared with traditional nuclear power projects, this model can shorten project commissioning time by more than a decade and significantly reduce costs and construction risks. With the final investment decision expected to be made in 2027, the project plans to deploy GE Vernova 7HA.02 gas turbines and GE Vernova Hitachi BWRX-300 small modular reactors (SMRs) to create a first-of-its-kind gas-to-nuclear hybrid power plant.

2026-09-17

U.S. Trade and Development Agency (USTDA): Promoting U.S. Civil Nuclear Energy Technology, Supporting Thailand's First Nuclear Power Project

On September 14, the U.S. Trade and Development Agency (USTDA) announced the promotion of U.S. civil nuclear energy technology to support Thailand in assessing the feasibility of building its first nuclear power project. USTDA signed a feasibility study agreement with the Electricity Generating Authority of Thailand (EGAT) aimed at conducting a technical analysis of U.S. small modular reactor (SMR) technology. The project is planned to have a generating capacity of approximately 600 megawatts (600 MW), sufficient to meet the electricity needs of hundreds of thousands of households. As Thailand's economy grows, demand for reliable power is increasing to support broader economic development. For the United States, this cooperation advances our commitment to innovation and leadership in advanced civil nuclear energy. This is part of the U.S. 'nuclear...

2026-09-16

Construction of the "Helong-2" project begins, advancing toward hydrogen-boron fusion power generation

On September 15, the groundbreaking ceremony for the construction project of ENN Fusion's spherical torus hydrogen-boron plasma platform (the Helong-2 device) was grandly held at the ENN Fusion R&D Center in Langfang Economic and Technological Development Zone, Hebei Province. The Helong-2 construction project covers approximately 120 mu and focuses on building more than ten core systems to create the world's leading hydrogen-boron fusion experimental platform; the park is expected to be ready for equipment entry by the end of June 2027, complete device construction and commissioning and enter the experimental phase by the end of 2027, with the goal of lighting the first lamp of hydrogen-boron fusion by 2030. Planning rendering of the Helong-2 spherical torus hydrogen-boron fusion park. Officials from relevant departments of Hebei Province and Langfang City, and heads of the project construction unit, design unit, construction unit, and supervision unit attended the groundbreaking ceremony and jointly laid the foundation and turned soil for the project.

2026-09-16

Core Makeup Tank for Xudabao Nuclear Power Plant Unit 2 Arrives at Project Site

On September 14, the core makeup tank for Xudabao Nuclear Power Plant Unit 2 arrived at the Xudabao Nuclear Power Project site. The core makeup tank is an important passive engineered safety feature of the reactor coolant system and a major large-scale equipment on the construction path of the reactor building. During the manufacturing of this equipment, Liaoning Nuclear Power cooperated with China Nuclear Power Engineering Co., Ltd. by stationing personnel at the factory for full-process coordination, implementing dynamic control of equipment quality and manufacturing progress through "daily tracking and weekly assessment," and ensuring the smooth completion and on-schedule delivery of the core makeup tank for Unit 2 to the project site through measures such as optimizing production processes and implementing continuous operations, thus creating favorable conditions for the orderly commencement of main construction of the reactor building. Subsequently, the Equipment Procurement Department of Liaoning Nuclear Power...

2026-09-16