Hiconics Signs Contract for Main Helium Circulator Variable Frequency Drive Project at Xuwei Nuclear Heating and Power Generation Plant

Recently, Hiconics signed a contract for the main helium circulator variable frequency drive (VFD) project for the high-temperature gas-cooled reactor (HTGR) at the Jiangsu Xuwei Nuclear Heating and Power Plant, and will supply multiple sets of HC2000W four-quadrant water-cooled high-voltage VFDs for the project. This marks the second application of Hiconics' VFD technology in drive scenarios for key equipment related to Generation IV nuclear power, following the HTGR demonstration project at Huaneng Shandong Shidao Bay Nuclear Power Plant. The Jiangsu Xuwei Nuclear Heating and Power Generation Project is a comprehensive nuclear energy utilization project that adopts a coordinated operation model of "nuclear reactor – turbine generator unit – heating system," focusing primarily on industrial heating while also supplying electricity. Phase I of the project plans to construct two Hualong One pressurized water reactors and one HTR-PM600S high-temperature gas-cooled reactor...

2026-09-02

World's First 250,000 Tonne-Meter Ring Crane Rolls Off Production Line, Supporting Hualong One 2.0 Nuclear Power Construction

On August 31, the world's first 250,000 tonne-meter ring crane, jointly developed by SANY Heavy Lift and China Energy Engineering Group Guangdong Thermal Power & Litte Company, rolled off the production line at SANY's Huzhou Industrial Park in Zhejiang. Designed for the "one crane, two islands" construction requirements of Hualong One 2.0, the equipment can address the engineering challenge of covering module hoisting for two nuclear islands with a single unit, marking a key domestic localization breakthrough in China's ultra-large-tonnage nuclear power hoisting equipment. With the advancement of the Hualong One 2.0 "one crane, two islands" construction method, nuclear power projects have imposed higher requirements on the working radius, load capacity, and hoisting precision of heavy lifting equipment. In the past, related high-end equipment technology was long controlled by a few overseas companies. The 250,000 tonne-meter ring crane rolled off the production line this time has undergone seven years of technical research, achieving breakthroughs in structural design, manufacturing processes, and assembly control.

2026-09-02

Concrete Placement Completed for Raft Foundation of Circulating Water Pit on North Side of 5BMX Turbine Generator Building at Fangchenggang Nuclear Power Plant

On August 30, the concrete placement for the raft foundation of the circulating water pit on the north side of the 5BMX turbine generator building at the Fangchenggang Nuclear Power Plant in Guangxi, undertaken by China Energy Engineering Group Anhui Electric Power Construction No.2 Engineering Co., Ltd., was completed. The total concrete volume placed was 796 cubic meters, with two truck-mounted concrete pumps operating simultaneously, and the work was completed in approximately 22 hours. The circulating water pit raft foundation is a key underground structure of the turbine hall. This mass concrete placement was carried out using the horizontal layered pouring method. The project department made advanced overall arrangements, refined the construction plan, and organized safety and technical briefings for construction. During the placement, project personnel performed their respective duties with coordinated collaboration, efficiently advancing concrete transport, placement, vibration, surface finishing, curing, and other tasks. Dedicated personnel were assigned for on-site supervision to strictly control key parameters such as pouring speed, vibration depth, and slump, and to rigorously implement safety and quality control measures, ensuring the entire construction process was safe, controllable, and quality-compliant. Ultimately, this critical civil construction milestone was successfully completed, laying a solid foundation for the subsequent circulating water system construction and the overall structural construction of the turbine hall.

2026-09-02

Declaration of the Council of Heads of State of the Shanghai Cooperation Organization Member States on Strengthening Multilateral Partnership for Nuclear Safety and Nuclear Security

The Member States of the Shanghai Cooperation Organization (hereinafter referred to as the SCO), bound by historical ties, centuries-old traditions of good-neighborliness and mutual respect, declare their commitment to the SCO Charter, the Charter of the United Nations and universally recognized principles and norms of international law, including respect for sovereignty, territorial integrity and non-interference in internal affairs, guided by the Shanghai Spirit of mutual trust, mutual benefit, equality, consultation, respect for diverse civilizations and pursuit of common development, affirming that responsibility for nuclear security rests entirely with the State, noting that responsibility for nuclear safety rests with the operating organizations of nuclear facilities and the States in which nuclear facilities are located, attaching great importance to nuclear safety and nuclear security issues, which are important elements of international security directly affecting the lives of the peoples of the SCO Member States, and expressing deep concern over illicit trafficking of nuclear materials and...

2026-09-02

Mobilization Meeting for High-Quality Fuel Loading of Haiyang Nuclear Power Unit 3 Convened

On September 1, Shandong Nuclear Power organized a themed joint Party building learning session and the mobilization meeting for high-quality fuel loading of Haiyang Nuclear Power Unit 3. Centering on the goal of high-quality fuel loading for Unit 3, the meeting further unified understanding, clarified responsibilities, and promoted the safe, orderly, and high-quality implementation of fuel loading preparations, laying the foundation for the subsequent commissioning of the Phase II project of Haiyang Nuclear Power. The meeting conducted a themed joint Party building learning session. The Haiyang Project Department of Shanghai Nuclear Engineering Research and Design Institute (SNERDI), the Commissioning Center of SNERDI, China Nuclear Industry Fifth Construction Co., Ltd., and Jiangsu Electric Power Construction No. 3 Engineering Company respectively reported on the fuel loading preparation status of Unit 3. Participants discussed topics including Party building leading project breakthroughs and ensuring high-quality fuel loading of Unit 3. The meeting also commended...

2026-09-02

Rock Fusion AI Platform Streamlines the Entire Stellarator Design Workflow

Recently, the AI agent collaboration platform for stellarator design independently developed by Rock Fusion has achieved full coverage of the entire design workflow, encompassing key stages such as zero-dimensional parameter design, plasma configuration optimization and performance analysis, as well as coil engineering feasibility assessment. The company stated that the platform can search over a thousand initial configurations and hundreds of thousands of coil schemes, reducing the typical design iteration cycle from several weeks to several days. Rock Fusion stellarator concept image. Leveraging this platform, Rock Fusion has completed the full-machine physics design of a medium-sized superconducting stellarator with a major radius of 2 meters and a central magnetic field of 3 tesla. Design work for the company's other devices under development is also being advanced on the same platform. Stellarators rely on external three-dimensional coils to directly generate helical magnetic fields, eliminating the need to sustain magnetic confinement through plasma current. This mechanism inherently reduces the risk of major disruptions faced by tokamaks and offers the potential for long-pulse steady-state operation. In 2025, Germany's Wendelstein 7-X (W7-X) stellarator achieved significant progress in the "triple product" metric during long-duration discharges, drawing greater attention to the stellarator route.

2026-09-02

Zhejiang Jinqimen Nuclear Power Unit 1 Pressurizer Relief Tank Successfully Hoisted into Place

On August 30, the pressurizer relief tank, a major nuclear island equipment item of Unit 1 at Zhejiang Jinqimen Nuclear Power Plant, contracted by China Nuclear Industry Fifth Construction Co., Ltd. (CNF), was successfully hoisted into place. The entire hoisting process was smooth and orderly, with overall safety and quality under control. This hoisting has laid a solid foundation for the subsequent installation of main nuclear island equipment and the construction of the primary loop system. The pressurizer relief tank is an important auxiliary equipment of the reactor coolant system in a nuclear power plant. Its main function is to collect and condense the high-temperature and high-pressure steam discharged from the pressurizer safety valves, ensuring the safe and stable operation of the reactor system. The relief tank hoisted this time is pre-installed equipment in the nuclear island. The main body of the equipment is heavy in weight and large in size, with limited hoisting workspace. After being hoisted into place, it needs to be placed in the nuclear island building for a long period, and subsequent construction will be constrained by space, making it necessary to introduce the equipment precisely within the civil construction window period.

2026-09-02

Completion of Polar Crane Bridge Lifting for Unit 4 of Zhangzhou Nuclear Power Plant

On September 1, the lifting operation of the polar crane bridge for Unit 4 of the Zhangzhou Nuclear Power Project was successfully completed. The equipment was smoothly positioned under the traction of a 3200-ton crawler crane, with the entire process lasting 2 hours and 5 minutes, creating conditions for subsequent nuclear island plant construction and equipment installation. The polar crane bridge is a core component of the polar crane, installed at the top of the nuclear island plant, and serves as an important structure of the key lifting equipment within the nuclear island plant. Once put into operation, it will provide support for various lifting operations during the installation and operation phases of the nuclear power plant. The total weight of this lifting exceeded 420 tons, with a lifting height of over 100 meters. The project team selected a 3200-ton crawler crane and used a dedicated spreader beam for the operation. In response to challenges such as wind disturbance during high-altitude slewing, limited clearance between the bridge and plant structures, and high load-bearing requirements for the large crawler crane positioning, the construction team conducted simulation rehearsals in advance, optimized lifting condition parameters, verified the stress conditions of the crane, spreader beam, and lifting points, and refined control requirements for key operations.

2026-09-02

SNPAS Simulation Center Nuclear Power Simulator Team Awarded AAAA-Level Quality-Trustworthy Team in the Power Industry

On August 31, the China Water Conservancy and Electric Power Quality Management Association announced the results of the 2026 Power Industry Quality-Trustworthy Team Exchange and Evaluation. The Nuclear Power Simulator Team of the SNPAS Simulation Center stood out among numerous participating teams nationwide and was awarded the AAAA-level Quality-Trustworthy Team. The Power Industry Quality-Trustworthy Team Exchange and Evaluation organized by the China Water Conservancy and Electric Power Quality Management Association is a highly influential quality management team evaluation activity in the national power industry. The evaluation is conducted in accordance with the "Evaluation Criteria for the Construction of Quality-Trustworthy Teams in the Power Industry" (T/CEC 501-2021), comprehensively assessing team performance in safety production, quality management, customer service, innovation improvement, and standardization construction...

2026-09-02

Dongfang Electric's Nuclear Generator Sealing Patent Wins China Patent Excellence Award

The China National Intellectual Property Administration recently announced the award decision for the 26th China Patent Award. Dongfang Electric Group won the China Patent Excellence Award for three patents, among which "a full-path sealing structure for turbine generators and its assembly method" has been applied to nuclear power generating unit-related projects, demonstrating its innovative achievements in key technologies for nuclear power equipment. The patent, applied to the world's first Hualong One nuclear power generating unit, proposes a full-path sealing structure that breaks through the traditional intermittent sealing approach, constructing a continuous, uninterrupted sealing surface. By proactively preventing hydrogen leakage in generators, it reduces the risk of hydrogen explosion at the source. The related technology has achieved large-scale application and has been successfully used in the national major science and technology project Guohé One...

2026-09-02

Qinshan Nuclear Power Plant Unit 2 Outage 218 Officially Commences

At 2:20 AM on September 1, Unit 2 of Qinshan Phase II was disconnected from the East China Power Grid, marking the official commencement of Outage 218. This outage is a Category C overhaul for Unit 2 of Qinshan Phase II. In addition to the routine annual overhaul items such as reactor coolant system head removal and installation, fuel handling, SG eddy current inspection and flushing, it also includes important special tasks such as generator rotor removal, insertion and inspection, diesel generator excitation system renovation, PSR weakness anti-boron dilution modification, reactor coolant system automatic makeup and residual heat removal eddy current detection function, and nuclear island low-voltage switchgear renovation. The planned items for this outage total 6,119: including 3,764 preventive items, 171 strategic maintenance items, 789 periodic tests, 133 modification work orders, and 1,262 other types of work.

2026-09-01

Multiple Units at Tianwan Nuclear Power Plant Go Live with Self-Developed EPM System

On August 31, the EPM system, a production management platform independently developed by China National Nuclear Power (CNNP), was officially launched at Units 3, 4, 7, and 8 of Tianwan Nuclear Power Plant. This launch marks a new stage of standardized management and control for Jiangsu Nuclear Power's production management, and also provides a practical example from Tianwan Nuclear Power Plant for CNNP's digital transformation. The EPM system is a new-generation nuclear power plant production management system independently developed by CNNP with fully independent intellectual property rights. Designed to meet the operational needs of nuclear power plant field operations, the system integrates business processes such as planning, operations, maintenance, equipment, and safety permits, unifies plant-wide work execution standards, and achieves closed-loop control across the entire production management chain. The system covers...

2026-09-01

Harbin Engineering University Establishes Research Institute for Spent Fuel Reprocessing and Advanced Materials

On August 31, the inauguration ceremony of the Research Institute for Spent Fuel Reprocessing and Advanced Materials at Harbin Engineering University was held at the university's Qihang Activity Center. More than 150 participants attended the meeting, including academicians and experts in the field of nuclear science and technology, representatives from industry and enterprises, peer institutions, and alumni. The newly established institute will address the needs of nuclear energy safety assurance and sustainable development by integrating the university's advantageous disciplinary resources in nuclear science, materials, and chemical engineering, focusing on breakthroughs in spent fuel reprocessing processes, advanced materials development, and related key core technologies, while promoting the coordinated development of basic research, technological breakthroughs, and commercialization of research outcomes. At the meeting, several attending experts noted that spent fuel reprocessing is a critical part of the nuclear f...

2026-09-01

First Batch of Shift Supervisors and Deputy Shift Supervisors Assume Duties at Xudabao Nuclear Power Plant Units 3 & 4

On August 28, Liaoning Nuclear Power held the appointment ceremony for the first batch of shift supervisors and deputy shift supervisors for Units 3 & 4 of the Xudabao Nuclear Power Plant, with relevant company leaders in attendance. At the ceremony, Liaoning Nuclear Power announced the appointment decisions, officially marking the assumption of duties by the first batch of shift supervisors and deputy shift supervisors for Units 3 & 4. A documentary short film played at the event reviewed the growth journey of the operations team, from theoretical study and systematic training to on-site practical operations and on-the-job experience. Having undergone training, practice, selection, and assessment, the personnel have now entered key positions in plant operations. On the same day, the head of the Operations Department signed annual business performance responsibility agreements with representatives of the first batch of shift supervisors, clarifying their accountabilities for safe performance of duties. Subsequently, the first batch of shift supervisors and deputy shift supervisors collectively...

2026-09-01

Manur Nuclear Power Produces Domestically Heaviest Slender Withdrawal-Type ESR Ingot

On August 30, 2026, the 60t withdrawal station of the 150-ton-class atmosphere-protected electroslag remelting (ESR) furnace at Yantai Taihai Manur Nuclear Power Equipment Co., Ltd. successfully produced a slender ESR ingot with a diameter of approximately 1270 mm and a weight of 61.2 tons, setting a new record for domestically manufactured special metallurgy equipment and consolidating the equipment foundation for the supply of high-end nuclear power forgings. The 61.2-ton slender withdrawal-type ESR ingot produced this time features a regular appearance and excellent surface quality. During the smelting process, equipment and operations including atmosphere protection, melt rate control, precise molten metal level control, fully automatic electrode exchange, and the complete withdrawal process remained stable and controllable. This ingot is currently the heaviest slender withdrawal-type ESR ingot produced in China, representing another critical leap in domestically manufactured large-tonnage withdrawal-type ESR equipment...

2026-08-31

CGN and CSSC Deepen Cooperation in Nuclear Power and New Energy Sectors

On August 28, Pang Songtao, Deputy Secretary of the Party Committee and General Manager of China General Nuclear Power Group Co., Ltd. (CGN), met with Xu Peng and his delegation, Secretary of the Party Leadership Group and Chairman of China State Shipbuilding Corporation Limited (CSSC), at the CGN Tower. The two sides conducted in-depth exchanges on cooperation in areas such as nuclear power, new energy, industrial software, and technological innovation. Peng Yuanpu, Member of the Party Leadership Group and Deputy General Manager of CSSC, Ma Yunxiang, Assistant to the General Manager, Cai Zhen, Member of the Standing Committee of the Party Committee and Deputy General Manager of CGN, and Zhou Jianping, Member of the Party Committee of CGN, Vice President and General Counsel of CGN Power, attended the meeting. Pang Songtao extended a warm welcome to Xu Peng and his delegation. He noted that the cooperation between CGN and CSSC began with the Daya Bay Nuclear Power Plant and has spanned over four decades, with cooperation areas gradually expanding from nuclear power to environmental governance, new energy development, industrial software, and other fields, achieving fruitful results in areas such as nuclear emergency diesel generators and wind power equipment. Looking toward the “15th Five-Year Plan” period, he expressed the hope that both sides would further expand cooperation in new areas such as equipment manufacturing and technological innovation while consolidating the existing cooperation foundation, so as to better serve the national strategic agenda.

2026-08-31

Taiwan plans to include small modular reactors and nuclear fusion in new energy exploration

Taiwan's administrative agency head Cho Jung-tai stated on August 26 that, in response to the rapid global development of energy technologies, Taiwan maintains an open attitude toward new nuclear energy technologies and has gradually invested in research and evaluation of directions such as small modular reactors (SMRs) and nuclear fusion. Relevant budgets have been included in discussions, and the central government's general budget for the next fiscal year also plans to allocate funds for engaging with and tracking global nuclear fusion technology progress. Cho Jung-tai stated at a new energy forum that day that, for Taiwan, energy types that have not yet entered large-scale commercial application or whose research and development technologies are still immature can all be regarded as targets for new energy exploration. In addition to technologies such as geothermal, small hydropower, and hydrogen energy, new nuclear energy has also been listed as a direction for future sustained observation and research...

2026-08-31

Nova Fusion Completes RMB 1.2 Billion Pre-A Series Financing

Nova Fusion Energy Technology (Shanghai) Co., Ltd. recently announced the completion of its Pre-A series financing totaling RMB 1.2 billion, comprising both the Pre-A round and Pre-A+ round. The company stated that within 16 months since its establishment, it has completed a RMB 500 million angel round, a RMB 700 million angel+ round, and this round of financing, bringing cumulative fundraising to RMB 2.4 billion with a post-investment valuation exceeding RMB 10 billion. In this round, Meituan Longzhu and Hillhouse Ventures continued their participation, while Lenovo Capital and Guozhong Capital joined as new strategic investors. The company stated that the funds from this round will primarily be used for new device construction, key technology iteration, industrial base preparation, and subsequent fusion energy output verification efforts. Nova Fusion focuses on field-reversed configuration (FRC) small...

2026-08-31

CA01 Module of Unit 1 at Guangxi Bailong Nuclear Power Plant Successfully Hoisted into Position in the Nuclear Island

On August 29, the CA01 module of Unit 1 at the Bailong Nuclear Power Plant of SPIC Guangxi Nuclear Power was precisely positioned, marking a new phase of parallel civil construction and installation in the nuclear island. ▲On August 29, the hoisting operation of the CA01 module of Unit 1 at the Guangxi Bailong Nuclear Power Plant of SPIC was proceeding in an orderly manner. The CA01 module is located in the reactor building of the nuclear island and serves as the installation room for main equipment such as the reactor pressure vessel, steam generators, and pressurizer. The module is T-shaped in overall form, with external dimensions of 28 meters in length, 29 meters in width, and 24 meters in height. It consists of 47 sub-modules, with a total lifting weight of approximately 1,167 tons, making it the largest and heaviest structural module in the nuclear island. The hoisting operation commenced at 8:07 a.m. and, after a series of maneuvers including lifting, hovering, slewing, lowering, and adjustment, was successfully positioned at 12:58 p.m., with the entire process being safe, controllable, stable, and orderly.

2026-08-31

Domestically Produced Nuclear-Grade Resins Fully Verified and Ready for Use

On August 28, China General Nuclear Power Group (hereinafter referred to as CGN) announced that five nuclear-grade resin products developed under its leadership have all been put into engineering application, with a cumulative total of 12 batches used at nuclear power plants including Daya Bay, Ningde, Yangjiang, Taishan, and Hongyanhe. Among them, the first product has been operating stably for over three years in the steam generator blowdown system (APG system) of nuclear power plants, with key performance indicators comprehensively outperforming imported counterparts of the same category, and the domestic nuclear-grade resin production line. Nuclear-grade resins are known as the "kidneys" of nuclear power water treatment systems, serving as core materials that ensure stable water chemistry indicators of nuclear power units and prevent equipment corrosion. For a long time, these materials have been highly dependent on imports, posing supply security risks such as long delivery cycles, unstable batch quality, and rising prices year by year.

2026-08-29

World's First 14,000-Ton-Class Ring Crane Rolls Off Production Line, Capable of Supporting Full-Module Lifting for HPR1000 2.0

Recently, XCMG's world's first 14,000-ton-class ring crane officially rolled off the production line. Su Zimeng, President of China Construction Machinery Association; Wang Guohua, Member of the Party Committee and Vice President of Sinopec Engineering (Group) Co., Ltd., as well as Party Secretary and General Manager of its Lifting and Transportation Company; and Yang Dongsheng, Chairman of XCMG Group and XCMG Machinery and Party Secretary, attended the launch ceremony. Xia Dechang, General Manager and Party Secretary of XCMG Crane Machinery Division, announced the successful rollout of the equipment. According to reports, the 14,000-ton-class ring crane was developed to meet the lifting needs of ultra-large and ultra-heavy equipment in major projects such as nuclear power, petrochemical, and marine engineering, with a focus on serving integrated lifting scenarios for large modules. The equipment achieves full-industry-chain...

2026-08-29