Search Results
Keyword:El
Chubu Electric Power considers withdrawing Hamaoka nuclear plant restart review application
Chubu Electric Power Company (CEPCO) is considering withdrawing its restart review application for Units 3 and 4 of the Hamaoka Nuclear Power Plant. The plant is located in Omaezaki City, Shizuoka Prefecture, Japan, and it was previously revealed that seismic design data related to the restart review was suspected of falsifying "design basis ground motion" data, making the ground motion amplitude in the submitted materials lower than originally expected. On the morning of the 11th, Chubu Electric Power announced that it had received a report submitted by an investigation committee composed of external lawyers. The committee was commissioned by Chubu Electric Power to investigate the causes and process of the seismic design data issue at the Hamaoka Nuclear Power Plant. Chubu Electric Power President Shingo Hayashi and others plan to hold a press...
2026-09-11
CGN's 33 in-operation nuclear power units achieve RMB-denominated pricing and settlement for operational period insurance
On September 10, the "CGN In-Service Nuclear Power Plant Operational Period Insurance Project Co-Insurance Agreement" was signed in Shenzhen. The agreement achieves RMB-denominated pricing and settlement for major types of nuclear power plant operational period insurance, changing the convention of China's nuclear insurance market's over thirty years of primarily relying on foreign currency transactions. Nuclear insurance is an important type of insurance for ensuring the safe and stable operation of nuclear power units. Due to the enormous insured amount of a single policy, it typically requires joint underwriting by hundreds of insurance companies both domestically and internationally, and is regarded by the insurance industry as one of the most special and complex types of insurance. Since China's first nuclear power plant operational insurance policy——the Daya Bay Nuclear Power Plant operational insurance policy——was issued in 1993, China's nuclear power industry has long followed mature foreign models...
2026-09-11
Yanchaojuneng Completes VPI of Stainless Steel-Jacketed Superconducting Prototype Coil for Stellarator
Recently, Yanchaojuneng (Shanghai) Technology Co., Ltd. completed vacuum pressure impregnation (VPI) of a next-generation stellarator stainless steel-jacketed three-dimensional shaped superconducting prototype coil. Previously, the prototype coil had completed two core processes: three-dimensional precision winding and ground insulation wrapping. The completion of VPI signifies that the company has established an autonomous process chain from coil winding and forming, insulation wrapping, to integrated insulation curing. The stellarator is an important device type for steady-state operation in the field of controlled nuclear fusion, capable of reducing the risk of major plasma disruptions. Three-dimensional shaped superconducting coils are the core components for building the magnetic field that confines plasma in a stellarator. Public information shows that Germany's W7-X stellarator uses aluminum alloy jackets...
2026-09-10
NASA's Chandra Telescope Discovers 84 Mysterious Supersoft X-ray Sources
NASA's Chandra X-ray Observatory recently announced that researchers using the observatory's publicly available observation data discovered 84 mysterious celestial objects known as supersoft X-ray sources in 6 galaxies. The related research was published in Nature Astronomy. Image credit: X-ray: NASA. These objects emit X-rays with unusually low energy and may be accompanied by strong high-energy ultraviolet radiation. The research team stated that the behavior of these objects is clearly different from previously observed known celestial bodies and may provide new clues for explaining the origin of Type Ia supernovae and the electron-stripping mechanism in the intergalactic medium. The 6 galaxies covered by this search include two spiral...
2026-09-10
Turkey and Danish Developer Sign Memorandum of Understanding on Thorium-Based Molten Salt Reactor Research
On September 9, 2026, the Turkish Ministry of Energy stated that the Turkish Energy, Nuclear and Mining Research Institute (TENMAK) has signed a memorandum of understanding with Danish advanced reactor developer Copenhagen Atomics (CA), under which the two parties will conduct collaborative research on the application of thorium as a potential nuclear fuel for molten salt reactors. Tenmak and Copenhagen Atomics signed the memorandum of understanding on September 7. Photo courtesy of the Turkish Ministry of Energy and Natural Resources. The Turkish Ministry of Energy stated that the cooperation aims to advance research in areas related to thorium as a potential fuel for nuclear reactors, with a focus on assessing...
2026-09-10
American Society of Nuclear Cardiology Releases New 2026 Guidelines for Stress Testing in SPECT and PET Myocardial Perfusion Imaging
The American Society of Nuclear Cardiology (ASNC) has recently developed and released the "2026 ASNC Guidelines for Stress Testing in SPECT and PET Myocardial Perfusion Imaging." The guidelines have been published online in the Journal of Nuclear Cardiology and will replace the 2016 version to reflect changes in the field of nuclear cardiology over the past decade in terms of technology application, examination workflows, and clinical assessment. The new guidelines focus on stress testing in single-photon emission computed tomography (SPECT) and positron emission tomography (PET) myocardial perfusion imaging, updating recommendations on patient preparation, selection of stress testing modalities, safety management, protocols for different imaging modalities, image interpretation, and report writing. The guideline chair and lead...
2026-09-10
US Oak Ridge National Laboratory Advances 3D-Printed Nuclear Components Manufacturing and Certification
The US Oak Ridge National Laboratory (ORNL) is working with industry partners to advance the application of advanced manufacturing technologies, with a focus on heavy-duty 3D printing, AI-driven automated manufacturing, and digital qualification methods, to address issues such as unstable US industrial supply chains, shortages of skilled workers, and long lead times for large custom components. At an advanced manufacturing facility in Tennessee, ORNL demonstrated two large-scale 3D printing manufacturing cases for the nuclear energy sector. Among them, a three-arm robotic system called MedUSA printed a steel nuclear pressure vessel approximately 3 feet by 5 feet with complex dome geometry by guiding molten steel. Researchers said...
2026-09-10
Czech Temelín Nuclear Power Plant to Load US Nuclear Fuel by Year-End
On September 9, the Temelín Nuclear Power Plant in the southern Czech Republic will begin using nuclear fuel produced by the US company Westinghouse Electric Company (Westinghouse). Czech energy company ČEZ has obtained permission from the Czech State Office for Nuclear Safety to use this type of fuel at the Temelín Nuclear Power Plant. The Temelín Nuclear Power Plant has two units in total. According to the plan, Westinghouse nuclear fuel will be loaded into the reactor core during the outage and maintenance of Unit 1 at the end of this year. The Dukovany Nuclear Power Plant, located in the southeastern Czech Republic, also plans to switch to Westinghouse fuel. Existing Czech nuclear power plants currently use Russian nuclear fuel, supplied by TVEL Fuel Company, a subsidiary of the Russian state nuclear energy corporation Rosatom...
2026-09-10
Putin Says Russian-Designed Nuclear Power Plant Will Provide Vietnam with Low-Cost Clean Electricity
On September 9, Russian President Putin said after talks with Vietnamese State President To Lam that, under the intergovernmental agreement signed by the two sides in March this year, the Russian-designed nuclear power plant project will be advanced for construction in Vietnam. Putin said the project is a flagship project in Russia-Vietnam bilateral cooperation. After the nuclear power plant is completed in the future, it will be able to provide large amounts of reasonably priced, environmentally friendly energy to Vietnam's industrial users and residential households.
2026-09-10
Egypt's El Dabaa Nuclear Power Plant Construction Progress Reviewed Jointly by Korea and Egypt
On September 10, 2026, Korea Hydro & Nuclear Power (KHNP) and Egypt's Nuclear Power Plants Authority (NPPA) jointly reviewed the construction progress of the El Dabaa Nuclear Power Plant project and exchanged views on further strengthening project collaboration. Kim Wan-joong, South Korean Ambassador to Egypt, and relevant personnel from Korea Hydro & Nuclear Power attended the meeting. During the meeting, Sherif Helmy, Chairman of Egypt's Nuclear Power Plants Authority, was briefed on the implementation of the scope of work undertaken by Korea Hydro & Nuclear Power. The two sides focused on discussions regarding strengthening working-level communication between Korea and Egypt, and coordinating the work arrangements of participating construction units and relevant institutions...
2026-09-10
Japan's GX investment expands nuclear power supply chain demand, 17 Korean nuclear power-related material and equipment suppliers visit Tokyo for business talks
On September 10, 2026, the Korea Trade-Investment Promotion Agency (KOTRA) announced that, together with Korea Hydro & Nuclear Power and the Korea Nuclear Industry Association, it had dispatched the 2026 Smart Energy Week Climate Technology Market Exploration Delegation to Tokyo, Japan. The delegation consisted of 17 Korean suppliers of materials, parts, and equipment in the new energy and nuclear power sectors. KOTRA stated that the move aims to align with Japan's energy transition and growing electricity demand, and to support Korean suppliers in entering the local Japanese supply chain. The Korean delegation, together with the Japan Electrical Manufacturers' Association (JEMA) and RX Japan, jointly held a Japanese power equipment industry...
2026-09-10
India's Hylenr Technologies Claims Detection of Rare Earth Element Signatures in Lattice-Confined Fusion System
Indian deep-tech company Hylenr Technologies announced on September 9 that it has observed evidence of element formation in an engineered lattice structure system, including rare earth element signatures. The company stated that this result could provide a technological pathway for nucleosynthesis and strategic materials production that differs from traditional mining. According to the company, the related results stem from Hylenr Technologies' more than 10 years of fusion technology research centered on lattice-confined fusion. Part of the research, titled "Nuclear Signatures in Hydrogen-Loaded Nickel-Palladium Lattice-Confined Systems," was presented earlier this month at the 27th International Conference on Condensed Matter Nuclear Science...
2026-09-10
US Centrus and Radiant Sign Long-Term HALEU Supply Agreement
On September 9, 2026, US nuclear fuel and services supplier Centrus Energy Corp. (Centrus) and mobile nuclear microreactor developer Radiant announced that the two parties have signed a multi-year definitive contract. Under the agreement, Centrus will supply high-assay low-enriched uranium (HALEU) fuel for Radiant's Kaleidos microreactor to support the deployment of multiple reactors. The agreement stipulates that Centrus will begin delivering HALEU by the end of this decade. The arrangement will add a domestic US fuel source for Radiant as it advances the commercial expansion of the Kaleidos reactor, and will also add a new HALEU customer for Centrus. The agreement also includes Ra...
2026-09-10
Lightbridge Approved to Conduct Advanced Nuclear Fuel Irradiation Testing at Idaho National Laboratory
On September 9, Lightbridge Corporation (Lightbridge, Nasdaq: LTBR), a developer of advanced nuclear fuel technology, announced that it has completed the signing of Project Task Statement No. 2 (PTS No. 2) under the Cooperative Research and Development Agreement (CRADA) with Battelle Energy Alliance, LLC (BEA), the operating contractor of Idaho National Laboratory (INL). Under this task statement, Lightbridge will gain access to the loop test facility of the Advanced Test Reactor (ATR) at Idaho National Laboratory to conduct irradiation testing of Lightbridge Fuel™ cladded fuel rods. The loop...
2026-09-10
US-based Thea Energy Unveils Helios Stellarator Fusion Power Plant Design
On September 9, 2026, Thea Energy, Inc., a fusion energy company based in Kearny, New Jersey, announced that 16 peer-reviewed papers on its Helios fusion power plant design had been published in a special issue of Fusion Engineering and Design (FED). The special issue, titled "Thea Energy's Helios Stellarator Power Plant Design," presents the Helios architecture and its key engineering solutions. According to Thea Energy, Helios is a stellarator fusion power plant architecture oriented toward commercial deployment requirements, integrating magnet coils that can be controlled by software to adapt to actual operating conditions, a stellarator divertor exhaust system for continuous fusion power generation operations, and a sectorized maintenance scheme supporting long-term operation...
2026-09-10