Search Results

RES Engineering to Supply HVAC and Water Treatment Equipment for Egypt's El Dabaa Nuclear Power Plant

August 12 news, RES Engineering has won the bid to supply refrigeration units, ventilation systems, and water treatment equipment for the under-construction El Dabaa Nuclear Power Plant in Egypt. According to the project schedule, the scope of supply covers multiple systems and equipment in the main buildings and public areas of the nuclear power plant, including central and zoned air conditioning, standalone air conditioning, ventilation equipment, water-cooled chiller units, fans, control cabinets, humidifiers, electric heaters, steam generators, and water treatment equipment. RES Engineering stated that this project involves not only a large supply scale but also a complex variety of equipment types. Different equipment needs to be matched in terms of technical parameters, project requirements, quality standards, and delivery schedules...

2026-08-15

Kazakhstan's National Nuclear Center Introduces Computer Modeling Methods for Reactor Safety

The National Nuclear Center of the Republic of Kazakhstan (NNC RK) recently presented its modern computer modeling methods used in the safety justification of reactor facilities. Arthur Suraev, a leading researcher at the laboratory of the branch Institute of Atomic Energy, stated that high-precision computational models have become an important tool for assessing reactor normal operation, design-basis accidents, and beyond-design-basis accident conditions. Suraev noted that computer modeling enables preliminary evaluation of neutron physics, thermal-hydraulic, and structural response processes inside a reactor before conducting complex and expensive experiments. By analyzing interrelated physical processes,...

2026-08-16

SLAC team observes progressive melting of copper under extreme heat in real time

Researchers at the SLAC National Accelerator Laboratory, under the U.S. Department of Energy, and their collaborators used the Mega-electron-volt Ultrafast Electron Diffraction (MeV-UED) facility to observe in real time the melting process of copper atoms under extreme temperatures. The study was published in Nature Communications. Future fusion power plants will need to replicate fusion reactions that occur inside stars here on Earth. The core plasma can reach temperatures of hundreds of millions of degrees Celsius, while surrounding structural materials must withstand sudden, intense thermal shocks. Copper and its alloys, owing to their excellent thermal conductivity, are considered capable of serving as "heat sinks" in fusion systems...

2026-08-15

Red Fort Address: Modi Reaffirms "Developed India" Vision for 2047, Sets 100 GW Nuclear Power Target

On August 15, India celebrated its 80th Independence Day, with Prime Minister Narendra Modi addressing the nation from the ramparts of the Red Fort in Delhi. The core message centered on the national vision of building a developed India by 2047. He called on citizens to move beyond small-target thinking and embrace greater developmental ambitions, emphasizing that unwavering resolve could chart a path forward for the nation amid complex circumstances. This statement continues India's recent political narrative of using the 100th anniversary of independence as a long-term development milestone. In his address, Modi highlighted India's economic and industrial transformations over the past 12 years. He noted that India, once regarded as one of the fragile five economies, has now become one of the fastest-growing major economies globally...

2026-08-15

Morocco Conducts 18 Expert Missions with IAEA in 2025, Civil Nuclear Cooperation Expands to African Level

Morocco's cooperation with the International Atomic Energy Agency is shifting from mere technical assistance to more active participation in regional capacity building. In 2025, Moroccan experts completed 18 international expert missions under the IAEA Technical Cooperation framework, with the agency's assistance to Morocco reaching €1.17 million in the same year. This indicates that Morocco has established a certain foundation in nuclear science, nuclear technology applications, and regulatory capabilities, and is beginning to play a more significant role in Africa's nuclear technology cooperation network. The National Center for Energy, Nuclear Science and Nuclear Technology in Rabat was granted the status of IAEA Collaborating Centre in September 2024, with a cooperation cycle covering 2025 to...

2026-08-15

IAEA "Lise Meitner Programme" Delegation Visits Russia's Kalinin Nuclear Power Plant

The International Atomic Energy Agency (IAEA) Lise Meitner Programme organized its first visit to Russia, with 14 female representatives from the nuclear field of 14 countries recently visiting the Kalinin Nuclear Power Plant (Kalinin NPP) to learn about plant operations, safety management, and personnel training. The Russian itinerary was organized by the Rosatom Technical Academy. The delegation toured the Kalinin NPP industrial site, the turbine halls of the units, and the main control room of Unit 4. Evgeny Solovyov, Deputy Chief Engineer for Safety and Reliability at Kalinin NPP, introduced the visitors to...

2026-08-16

Utah Energy Hub Seeks Diversified Growth: Coal, Nuclear, and Data Centers in Parallel Development

On August 12, at the Carbon & Emery Energy Collaborative meeting held in Price, Utah, local government and energy companies discussed regional economic development, coal production, nuclear energy projects, and the electricity demand driven by data centers. The core message conveyed at the meeting was that while coal remains a vital pillar for Carbon County and Emery County, the future of energy and economic growth no longer depends on a single source, but rather requires the combined support of coal, nuclear energy, and emerging industries. Carbon County Commissioner Jared Haddock noted that the county's taxable value has decreased by approximately $1 billion over the past decade, putting greater pressure on local government to maintain its tax base. To avoid...

2026-08-16

Philippine Steel Plant in Davao Raided: Radioactive Isotopes Detected in Finished Rebar and Multiple Materials at the Facility

On August 14, Philippine authorities conducted a raid on Davao Mighty Steel Corp., a steel manufacturing plant located in Barangay Ilang, Bunawan District, Davao City. The operation followed an investigation launched by the National Bureau of Investigation (NBI) after receiving reports that the company was involved in the production and sale of substandard steel rebar, with the scope of the investigation subsequently expanding after radioactive isotopes were detected in commercially sold DMS rebar. The operation was led by the National Bureau of Investigation, with the participation of the Presidential Anti-Organized Crime Commission (PAOCC), and was supported by the Philippine Nuclear Research Institute (PNRI), the Philippine Air Force, the Philippine Coast Guard's Chemical, Biological, Radiological and Nuclear emergency response units, the Coast Guard Special Operations Group, and the Army's 10th Infantry Division.

2026-08-15

Zaporizhzhia Nuclear Power Plant Launches Major Overhaul of Damaged Diesel Generator

On August 14 local time, the Zaporizhzhia Nuclear Power Plant (ZNPP) stated that it has launched a major overhaul of a damaged diesel generator unit to ensure the plant's independent power supply capability in the event of an external power outage. The plant stated that maintenance work is currently progressing as planned, with a focus on the upkeep and repair of equipment related to safety systems. The diesel generator unit under repair is one of the independent power sources for the safety systems. Previously, during a complete interruption of external power supply, the backup diesel generator units provided power support for the plant to maintain essential safety functions. According to reports, experts on site have begun disassembling and inspecting the main components of the diesel generator unit to determine which parts need replacement or repair...

2026-08-15

Hungary Plans to Sink Two Barges Near Paks Nuclear Power Plant to Raise Danube Water Level

Hungarian authorities plan to conduct controlled sinking of two giant barges, each about 80 meters long, in the river section near the Paks Nuclear Power Plant on August 14, aiming to raise the local water level of the Danube and ensure cooling water supply for the nuclear power units. According to European sources, after the two barges are sunk, the water level in the relevant river section is expected to rise by about 20 centimeters. Recently, persistent high temperatures across many parts of Europe have driven the Danube's water level to a low point, putting pressure on water intake and power generation along the river. The Paks Nuclear Power Plant is the only operating nuclear power plant in Hungary. Due to the low water level of the Danube, the plant's power output has dropped to about 25% of its installed capacity. Earlier this week, Hungarian authorities also announced plans to build a riverbed weir on the Danube. Under current expectations, the project could raise the water level in the relevant river section by about 1 meter.

2026-08-15

The Energy Research Institute of Hefei Comprehensive National Science Center Achieves a Series of New Progress in Safety Assessment of Activated Corrosion Products under Magnetic Field Environments in Fusion Reactors

Recently, the Radiation Protection and Safety Research Center of the Energy Research Institute of Hefei Comprehensive National Science Center has made a series of significant progress in the field of safety assessment of activated corrosion products under magnetic field environments in fusion reactors. The research team conducted systematic studies on the corrosion behavior of China's low-activation ferritic/martensitic steel CLF-1 in magnetic field environments, from three dimensions: water corrosion characteristics, migration patterns of corrosion products, and the influence of surface roughness. The relevant results have been published as three papers in the journal *Nuclear Materials and Energy*, which is ranked in Zone 1 of the emerging journal classification table. This series of research outcomes provides key scientific evidence for the radiological safety assessment of cooling water systems in fusion reactors...

2026-08-15

CNNC Innovation Multi-functional Surface Modification Device Shipped and Delivered

On August 14, 2026, the multi-functional surface modification device developed by CNNC Innovation (Chengdu) Technology Co., Ltd. (hereinafter referred to as "CNNC Innovation") was officially shipped and delivered. This multi-functional surface modification device utilizes CNNC Innovation's proprietary high-energy metal ion source, gas ion source, and supporting single-stage pulsed magnetron source power supply and DC-superimposed pulsed bias power supply. It can perform ion implantation surface modification, metal surface alloying, non-metal surface metallization, auxiliary heating, and other process operations. It can simultaneously achieve gas ion source cleaning and auxiliary deposition treatment. Through the DC-superimposed pulsed bias power supply, directional plasma functionality can be realized, which accelerates deposition efficiency while effectively suppressing abnormal arc discharge and improving film quality.

2026-08-15

Long-term radiation environment at Kola NPP remains under control: gamma dose rates within natural background levels, 15 permanent observation stations operating since 1972

Long-term monitoring results from the external radiation monitoring group at Russia's Kola Nuclear Power Plant show that gamma radiation dose rates around the plant site have consistently remained within natural background radiation levels, with radionuclide concentrations matching background values, indicating a sound radiation environment with no differences from surrounding areas. The station's radiation safety department collects surface water samples from the discharge canal monthly, with monitoring coverage encompassing all elements including the atmosphere, snow cover, bottom sediments, food products, algae, berries, mushrooms, and caged fish. The monitoring architecture consists of two tiers: 15 permanent environmental observation stations have been in continuous operation since before the commissioning of the first reactor unit in 1972; 13 ASKRO automated radiation environment monitoring system stations provide real-time ground-level gamma dose rate data, which is transmitted directly to the Rosenergoatom crisis center and integrated into the national unified radiation monitoring network. Approximately 200,000 cubic meters of air are drawn weekly through air filtration units to capture radionuclides, with volumetric activity of radioactive iodine also measured. A mobile radiological laboratory performs on-site spectrometric analysis. Annually, about 1,200 environmental samples are collected from around the plant site and delivered to the Polyarnye Zori laboratory, where well water samples analyzed by Canberra spectrometers yield "zero nuclide" results, with samples retained for one year for potential re-analysis. Biological samples are processed using the ashing method, and instrument sensitivity is sometimes insufficient to even detect any signal from the plant's impact.

2026-08-14

ITER Tokamak Advances Assembly in France, Fusion Experiment Targets 150 Million Degree Celsius Plasma

The ITER tokamak being assembled in southern France is one of the most closely watched large-scale experimental devices in global nuclear fusion research. The machine weighs approximately 23,000 tonnes in total and adopts a donut-shaped toroidal structure, using strong magnetic fields to confine high-temperature plasma, with the goal of replicating on Earth the conditions for fusion reactions that occur inside stars. Its plasma volume is approximately 830 cubic meters, far exceeding previous tokamak devices, and it is therefore expected to validate the key physics and engineering technologies required for future commercial fusion reactors. ITER adopts the toroidal tokamak structure because charged particles can move along toroidal paths under strong magnetic fields, thereby minimizing direct contact with the device's inner walls...

2026-08-14

Turkey's Nuclear Regulatory Authority (NDK) Relaxes Certification Requirements for Testing of Short-Cycle Equipment

Turkey's Nuclear Regulatory Authority (NDK) has recently adjusted testing requirements for equipment related to nuclear facilities, providing flexibility for equipment with a production cycle of less than 15 days. According to the decision published in the Official Gazette, under specific conditions, when such equipment undergoes certain tests, testing laboratories will no longer be required to hold specific accreditation for the corresponding test methods. This adjustment applies to the supply chain under the framework of the Regulation on Authorization of Nuclear Facilities. When the NDK, suppliers, or subcontractors are unable to provide a laboratory accredited for the relevant test methods, the original accreditation prerequisite may be waived for the testing of such equipment. This indicates that the regulatory authority, while ensuring quality control of nuclear facility equipment, has also left operational leeway for the testing process of short-cycle production equipment.

2026-08-14